HD-103-B Extreme Service 1911 trigger

Extreme Service triggers are manufactured to offer the shooter a 1911 trigger with features that will allow years of reliable, comfortable service.

Each Extreme Service trigger is made with hardened stainless steel bows that are micro-polished to reduce friction.

The long triggers measure ~.470" as shown in the picture.

The solid aluminum shoes are oversize in height allowing fitting to the individual pistol.

The "B" trigger is treated with Black DLC coating, for an all-black trigger.

 The "N" trigger is natural aluminum and stainless steel for an all silver trigger.

The arced face of the trigger shoe is smooth with a radius from side to side, so your trigger finger doesn't feel any sharp square corners where the face meets the sides.  It is free from serrations and holes for the over-travel screw that can chafe and abrade your trigger finger during long training sessions.

DO NOT attempt to turn the over-travel screw! The over-travel screw is permanently locked in place so it can't creep and render your pistol inoperative in an emergency. The initial adjustment to the over-travel stop is made by filing the tip and re-testing until the correct amount of over-travel is achieved.

Note that fitting by a knowledgeable installer is required to install this part.